Fire Systems Permit

Anyone seeking a Fire Systems Permit must secure the typical commercial permits for construction as well as the following based on the exact project:

Fire Alarm System:
-2 Sets of Design Plans, signed/sealed if over $5,000 valuation
-2 Sets of Specifications/Technical Documents

Fire Sprinkler System:
-2 Sets of Design Plans, signed/sealed over 50 heads
-2 Sets of Hydraulic Calculations
-No permit is required for relocating up to 3 heads

Fire Suppression System
-3 Sets of Design Plans, signed/sealed for over $5,000 valuation
-3 Sets of Specifications/Technical Documents

Exhaust Hoods:
-2 Sets of Design Plans, (pre-engineered) not signed/sealed
-2 Sets of Specifications/Technical Documents (pre-engineered)
-2 Sets of Construction Plans (Site Built) signed/sealed

Standpipe System:
-2 Sets of Design Plans, signed/sealed for over $5,000 valuation
-2 Sets of Hydraulic Calculations

Fire Pump:
-2 Sets of Design Plans, signed/sealed for over $5,000 valuation
-2 Sets of Hydraulic Calculations

Fire Protection System Demolition:
-2 Letters of Intent (all removals/disconnects)
-Scope of Work Statement

Paint Spray Booth
-2 Sets of Design Plans, (pre-engineered) not signed/sealed
-2 Sets of Specifications/Technical Documents (pre-engineered)
-2 Sets of Construction Plans (Site Built) signed/sealed

Tank Installations - Any Type:
-2 Sets of Design Plans, (pre-engineered) not signed/sealed
-2 Sets of Specifications/Technical Documents (pre-engineered)
-2 Sets of Construction Plans (Site Built) signed/sealed

Tank Removal - Any Type:
-2 Sets of Site Plans
-2 Letters of Intent
-Scope of Work Statement

For more information on this and all other permits you might need, contact us at Your Permit Solution!


Source: City of Melbourne

Permit Types - Floodplain Development Permit

Floodplain Development Permit

1) When is a Floodplain Development Permit Required?

A floodplain development permit is required for all development‐related changes on a property located in the A and V zones of the Town's FEMA Flood Map, that will alter the drainage characteristics of a property affect any equipment servicing the property, or that constitutes a “Substantial Improvement” under Town Ordinance and FEMA Regulations.

This includes but is not limited to:
‐ Construction of new structures
‐ Modifications or improvements to existing structures.
‐ Site Work that will alter the property’s drainage including: Excavation, Filling, Paving, Drilling, Driving of piles, Dredging, Land clearing, Grading, Landscape Improvements, Permanent storage of materials.
‐ Equipment upgrades or additions (A/C units and Generators).
‐ Vertical Additions or Improvements that are a “Substantial Improvement” per Ordinance and FEMA definitions.


2) Can I submit for my Floodplain Development Permit (FDP) at the same time as my Building Permit?

Yes – A Floodplain Development Permit is an additional permit that is required along with the Master Permit for the work being done. It is like any other Sub‐Permit.


3) What happens if my Floodplain Permit is not approved?

If Your FDP is not approved you will need to submit all items requested for review and they must be correct and current.


4) Why is the Town requiring these permits ?

For many years the Town has participated in the National Flood Insurance Program (NFIP) and the Community Rating System (CRS) program by the Insurance Services Office (ISO). These programs require a substantial amount of work to maintain the discounts our citizens receive on their flood insurance policies. The fees collected will help to defray the cost of the Town’s participation in these programs. In addition it will insure that the Town’s Floodplain Development ordinance is enforced correctly.


5) What Inspections are required for this permit?

There are three inspections required for this permit. They are: 1) Site Inspection, 2) Ground Rough Inspection ‐ before the slab pour, 3) Final Inspection.


6) Who can be issued a Floodplain Development Permit?

The Floodplain development Permit will be issued to the contractor who is issued the Primary permit for the work being performed at a location.


7) Can I submit “Revisions” to my Floodplain Permit once it is issued?

Yes – This is like any other permit issued by the Town. If there are changes that need to be made a revision is required and may be submitted.

For more information on this and other types of permits, contact Your Permit Solution!


Source: Town of Palm Beach

Fence and Retaining Wall Permit

If you're thinking of adding a fence or retaining wall to your residential or commercial property, here are few things you should know!

1. A Plot Plan must be submitted - showing an accurate drawing for the size, shape and dimensions of the lot that the fence or wall will be built on. Be sure to indicate where the fence/wall is to be located.

• Two copies are required for residential fencing
• Three copies are required for retaining or rockery walls
• Five copies are required for commercial fencing
• Height of the fence/wall and materials must be included in the plan
  

2. If an Architectural Committee is present in the area, approval is required in the form of a written report prior to plans being submitted to the building department.

3. Exemptions

• Fences used for landscaping that are less than 30" in height are exempt from a building permit if not located within the sight triangle.
• You may replace up to 100 linear feet of fence boards from damaged fence without a building permit. It must be similar fencing and in the exact same location.
• If your lot includes more than one acre of land, the Development Code allows agricultural uses of the land and if you use strictly range fencing (t-bar and wire only), you DO NOT need a fence permit. If, however, you use wood or any other type of materials, you are then required to obtain a building permit.

For more information on Fence and Retaining Wall Permits, contact Your Permit Solution!

Permit Types - Elevator Permit

Elevator Permits



Florida law requires every registered elevator company to have a permit issued by the Bureau of Elevator Safety before installing, altering, or relocating any type of vertical conveyance licensed by the bureau.

Before an elevator permit can be issued, the registered Elevator Company doing the installation must do the following:

1. The company must obtain and review the construction plans for compliance with Florida law. These do not have to be turned in to the bureau but the company will be required to affirm that the plans they are using are in compliance.

2. The company must obtain the appropriate application form. If multiple conveyances (elevators, etc) are being installed, separate forms are required for each.

3. The Affidavit of Elevator Code Compliance must be obtained and completed. This form must be signed by a qualified agent of the elevator company doing the installation.

4. All required documentation and fees must be submitted to the appropriate department.

5. Once construction is completed, the conveyance must pass an inspection prior to beginning use.

For more information on this and other types of permits, contact Your Permit Solution!

Source: Florida Department of Business and Professional Regulation