Electrical Work

Planning on changing or upgrading the electrical work in your home?

When do I need a Permit?
Electrical permits are needed when installing or altering electrical service, wiring, or circuits in existing buildings. Examples include but are not limited to:

• Installing a new or temporary service
• Modifying existing service or circuits
• Relocating an electric water heater, furnace, or other electrical appliance
• An electrical plan may also need to be reviewed

Electrical permits are NOT required in the following cases:

• Appliance replacement without modification to electrical circuits, such as dishwashers
• Appliances connected to outlets with a plug
• Repair or replacement of motors, transformers, appliances, recessed or other light fixtures, switches, or control devices of the same type and rating in the same location
• Taping joints
• Removal of electrical wiring

Source: My Building Permit

Permit Types - Electrical Permit

Electrical Permit

An electrical permit is required to do the following:

• install or alter any permanent wiring or electrical device

• run additional wiring, put in an electrical outlet or light fixture, install a receptacle for a garage-door opener, or convert from fuse box to circuit breakers

• install or alter low-voltage systems such as security alarms or stereo or computer systems

For homeowners, a permit is not required to replace electrical devices or to perform the maintenance on an existing electrical installation.

If you are not sure if you need a permit, call the building department responsible for your area.

Permits are issued by Building Codes Division (BCD) field offices or your local building department, depending on the jurisdiction responsible for your area.

• Drawn plans are not necessary to get a permit to do residential electrical work.
• Drawn plans are not necessary to get a permit to perform residential electrical work, unless the service involves 400 amps or greater. Some building departments require a plan review for service over 400 amps.
• An electrical inspector or office staff member can help you make sure you have all the necessary information for the proposed project. If everything is in order, you can usually leave with your permit.
• Electrical permit fees are paid when the permit is issued.

Any work performed under a permit must be inspected by a certified electrical inspector. You may call the inspection request line at the building department in your area within 24 hours of completion of any phase of the project. A minimum of 24-hours' notice is usually required for inspections.

When you call, you will be asked for the permit number, homeowner's name, project address, type of inspection needed, and date on which the inspection is desired. Be prepared to furnish detailed directions to the job site and a detailed description of the electrical work performed.
Unless all of the work is outside and accessible, an adult needs to be at the site to provide access for the inspector.

For more information on how to acquire an electrical permit, call Your Permit Solution!

Source: Permits Protect